Project: Pv module with an enhanced lifetime of more than 40 years and reduced environmental impact

Acronym	PV40+ (Reference Number: 19)
Duration	01/10/2020 - 30/09/2023
Project Topic	The overall aim of the project is the improvement of the service life of a PV module from 25 to 40 years. The main objective of the project is the development and validation of a PV module architecture with at least 40 years operational lifetime. Within the project not only crystalline silicon, but also CIGS cell technology are considered. The main aim shall be achieved using double glass architecture and the use of an advanced polyolefin based encapsulant. The main benefit of polyolefin encapsulants will be the lack of acetic acid formation in operation, thus preventing or slowing down certain degradation modes like yellowing, corrosion or Potential Induced Degradation (PID). However, the most critical factor to be addressed is that the enhanced performance of the encapsulant has to be achieved without a significant cost increase to enable an overall reduction of the system cost taking the improved lifetime into account. A further focus is the development of accelerated reliability test procedures that refer to this enhanced lifetime and utilizing modelling approaches recognizing and predicting failures and degradation modes. The transnational consortium is formed across the value chain of photovoltaics, ranging from PV module technology, polymer technology, degradation modelling and module testing. The enhancement of the service life of a PV module to 40 years is the key driver to reduce the LCOE for a PV system. Following a simplified metrics, this means that the module related share of LCOE drops by 37% compared to a module with 25 years lifetime. As additional environmental benefit, improving the service life of a PV module from 25 to 40 years saves about 130 GW/year of new modules, which not need to be produced and 7 million tons/year of PV panel waste, which not needs to be recycled.
Website	visit project website
Network	Solar Cofund 2
Call	Solar Cofund 2 Additional Joint Call 2019

Project partner

Number	Name	Role	Country
1	Polymer Competence Center Leoben GmbH Smart Material & Surface Testing	Coordinator	Austria
2	Nice Solar Energy R&D	Partner	Germany
3	Zentrum für Sonnenenergie- und Wasserstoff- Forschung Baden-Württemberg	Partner	Germany
4	Lenzing Plastics GmbH & Co KG R&D	Partner	Austria
5	Gebze Technical University Materials Science and Engineering	Partner	Türkiye